China Wholesale SINAMICS V90 I/O cable Factories Pricelist - Siemens SINAMICS V90 servo drive system supplier – Varlot

An overview of the

Servo-drive system

The SINAMICS V90 servo drive is combined with the SIMOTICS S-1FL6 servo motor

Performance optimization, easy to use servo drive system, eight drive types, seven

Different motor shafts with high specifications, power range from 0.05kW to 7.0kW as well as single

Phase and three-phase power supply system so that it can be widely used in all walks of life, such as: fixed

Bit, transmission, winding and other equipment, while the servo system can be compared with the S7-1500T/

S7-1500/S7-1200 are perfectly matched to achieve rich motion control functions.

SINAMICS V90 servo drive

SINAMICS V90 is available in two versions for different applications: 

Siemens Simotics S-1FL6, supplier of high inertia motors

Power:

Pulse train (PTI) version

Control mode:

The PROFINE (PN) version

Control mode:

Protection grade:

3 ac 380 V…480 V (– 15% / +10%),

0.4 kW…7 kW

External pulse position control, internal set value bit

Set control, speed control, torque control

Use the profiddrive protocol through PROFINET

Suggest speed control *

IP20

Simotics S-1FL6 servo motor

3 types of shaft height:

Rated torque:

Rated/maximum speed:

The encoder:

Protection grade:

45 mm, 65 mm, 95 mm

1.27 Nm to 33.40 Nm

2000 rpm / 3000 rpm

Incremental encoder TTL 2500 PPR;

Multi-turn absolute value encoder 20 bits + 12 bits turn number

IP65, natural cooling

Other advantages:

Smooth operation: higher torque accuracy and extremely low speed fluctuation ensure better performance

Product quality of

Reliability design: high quality metal connector, motor standard oil seal, can be adapted

The bad environment

Torque output: rated torque output up to 33.4 Nm

Siemens Simotics S-1FL6, supplier of high inertia motors

Siemens Simotics S-1FL6

Select the motor according to the control performance:

• Low inertia motor,

Extremely high speed and acceleration can be achieved

Dynamic performance

• High inertia motor to achieve a more stable negative

Load adjustment, and achieved in torque and speed

Optimal control accuracy

According to the required torque and speed, determine the motor

Rated power

3. Select the encoder resolution

4. Select the motor switch

5. Determine shaft type

Siemens SINAMICS V90 supplier

1FL6022-2AF21-1AA1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.05KW;Nn =3000 U/min M0=0.16 Nm;Mn = 0.16nm axle height 20 mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N Parking Brakes Protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1AB1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.05KW;Nn =3000 U/min M0=0.16 Nm;Mn = 0.16nm axle height 20 mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N belt parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1AG1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.05KW;Nn =3000 U/min M0=0.16 Nm;Mn = 0.16nm axle height 20 mm increment encoder TTL 2500 increment/turn smooth axle tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1AH1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.05KW;Nn =3000 U/min M0=0.16 Nm;Mn = 0.16nm axle height 20 mm incremental encoder TTL 2500 incremental/RPM smooth axle tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.05KW;NN=3000 RPM M0 = 0.16nm;Mn = 0.16nm Shaft Height 20 mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N No lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.05KW;NN=3000 RPM M0 = 0.16nm;Mn = 0.16nm Shaft Height 20 mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N with lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.05KW;NN=3000 RPM M0 = 0.16nm;Mn = 0.16nm Shaft Height 20 mm Actual Value Encoder 20 bit (12 bit multiple turns) Smooth Shaft tolerance N No lock gate protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.05KW;NN=3000 RPM M0 = 0.16nm;Mn = 0.16nm Shaft Height 20mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6022-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN=0.05 kW;NN = 3000 M0 = 0.16 Nm;Mn = 0.16nm Axis height 20mm absolute value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6022-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN=0.05 kW;NN = 3000 M0 = 0.16 Nm;Mn = 0.16nm Axis height 20 mm Absolute value encoder single turn 21 bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6022-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN=0.05 kW;NN = 3000 M0 = 0.16 Nm;Mn = 0.16nm Shaft Height 20 mm Absolute Encoder Single Turn 21-bit with Smooth Shaft tolerance N Non Parking Brake, Protection Class IP65 with Drive-suitable Oil Seal SINAMICS V90

1FL6022-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN=0.05 kW;NN = 3000 M0 = 0.16 Nm;Mn = 0.16nm Shaft height 20 mm Absolute value encoder single turn 21 bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6024-2AF21-1AA1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.1KW;Nn =3000 U/min M0= 0.32nm;Mn = 0.32nm axis height 20mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1AB1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.1KW;Nn =3000 U/min M0= 0.32nm;Mn = 0.32nm axis height 20 mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N belt parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1AG1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.1KW;Nn =3000 U/min M0= 0.32nm;Mn = 0.32nm axle height 20 mm increment encoder TTL 2500 increment/turn smooth axle tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1AH1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.1KW;Nn =3000 U/min M0= 0.32nm;Mn = 0.32nm axle height 20 mm incremental encoder TTL 2500 incremental/turn smooth axle tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.1KW;NN=3000 RPM M0 = 0.32nm;Mn = 0.32nm Shaft Height 20mm Actual value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N No lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.1KW;NN=3000 RPM M0 = 0.32nm;Mn = 0.32nm Shaft Height 20mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N with lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.1KW;NN=3000 RPM M0 = 0.32nm;Mn = 0.32nm Shaft Height 20mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N No Gate Protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.1KW;NN=3000 RPM M0 = 0.32nm;Mn = 0.32nm Shaft Height 20mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6024-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.1KW;Nn =3000 U M0= 0.32nm;Mn = 0.32nm Axis height 20mm absolute value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6024-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.1KW;Nn =3000 U M0= 0.32nm;Mn = 0.32nm Axis height 20mm Absolute value encoder single turn 21-bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6024-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.1KW;Nn =3000 U M0= 0.32nm;Mn = 0.32nm Axle Height 20mm Absolute Encoder Single Turn 21-bit with Smooth Axle tolerance N Non Parking Brake, Protection Class IP65 with Drive-fit Oil Seal SINAMICS V90

1FL6024-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.1KW;Nn =3000 U M0= 0.32nm;Mn = 0.32nm Shaft height 20mm Absolute value Encoder single turn 21-bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6032-2AF21-1AA1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.2KW;Nn =3000 U/min M0=0.64 Nm;MN = 0.64 Nm.Axle height 30 mm delta encoder TTL 2500 delta/swivel slip key tolerance N Parking Brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1AB1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.2KW;Nn =3000 U/min M0=0.64 Nm;MN = 0.64 Nm.Axle height 30 mm delta encoder TTL 2500 delta/swivel slip key tolerance N belt parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1AG1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.2KW;Nn =3000 U/min M0=0.64 Nm;MN = 0.64 Nm.Axle height 30 mm delta encoder TTL 2500 delta/turn smooth axle tolerance N Parking Brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1AH1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.2KW;Nn =3000 U/min M0=0.64 Nm;MN = 0.64 Nm.Axle height 30 mm delta encoder TTL 2500 delta/turn smooth axle tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90 Siemens SINAMICS V90 supplier

1FL6032-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.2KW;Nn =3000 RPM M0 = 0.64 Nm;Mn = 0.64nm Shaft Height 30mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N No lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.2KW;Nn =3000 RPM M0 = 0.64 Nm;Mn = 0.64nm Shaft Height 30mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N With lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.2KW;Nn =3000 RPM M0 = 0.64 Nm;Mn = 0.64nm Shaft Height 30mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N No Gate Protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.2KW;Nn =3000 RPM M0 = 0.64 Nm;Mn = 0.64nm Shaft Height 30mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6032-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230 V three-phase AC Pn = 0.2KW;Nn =3000 U M0= 0.64nm;Mn = 0.64nm Axle height 30mm Absoluted value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6032-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230 V three-phase AC Pn = 0.2KW;Nn =3000 U M0= 0.64nm;Mn = 0.64nm Axis height 30mm Absolute value encoder single turn 21-bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6032-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230 V three-phase AC Pn = 0.2KW;Nn =3000 U M0= 0.64nm;Mn = 0.64nm Axle height 30mm Absolute value encoder single-turn 21-bit with smooth shaft tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6032-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230 V three-phase AC Pn = 0.2KW;Nn =3000 U M0= 0.64nm;Mn = 0.64nm Shaft height 30mm Absolute value Encoder single turn 21-bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6034-2AF21-1AA1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.4KW;Nn =3000 U/min M0=1.27 Nm;Mn = 1.27nm axis height 30mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1AB1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.4KW;Nn =3000 U/min M0=1.27 Nm;Mn = 1.27nm axle height 30mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N belt parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1AG1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.4KW;Nn =3000 U/min M0=1.27 Nm;Mn = 1.27nm axle height 30mm delta encoder TTL 2500 delta/turn smooth axle tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1AH1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN= 0.4KW;Nn =3000 U/min M0=1.27 Nm;Mn = 1.27nm Axis H8 30 mm Increment Encoder TTL 2500 Increment/RPM Smooth Axis Tolerance N with Parking Brakes Protection Class IP65 with Sealing Ring and Inverter Compatible SINAMICS V90

1FL6034-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.4KW;NN=3000 RPM M0 = 1.27 Nm;Mn = 1.27nm Shaft Height 30mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N No lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.4KW;NN=3000 RPM M0 = 1.27 Nm;Mn = 1.27nm Shaft Height 30mm Actual value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N With lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.4KW;NN=3000 RPM M0 = 1.27 Nm;Mn = 1.27nm Shaft Height 30mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N No Gate Protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.4KW;NN=3000 RPM M0 = 1.27 Nm;Mn = 1.27nm Shaft Height 30mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft Tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6034-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.4KW;Nn =3000 U M0= 1.27nm;Mn = 1.27nm axle height 30mm absolute value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6034-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.4KW;Nn =3000 U M0= 1.27nm;Mn = 1.27nm Axis height 30mm Absolute value encoder single turn 21-bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6034-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.4KW;Nn =3000 U M0= 1.27nm;Mn = 1.27nm axle height 30mm absolute value encoder single-turn 21-bit with smooth axle tolerance N non-parking brakes, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6034-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230V three-phase AC PN= 0.4KW;Nn =3000 U M0= 1.27nm;Mn = 1.27nm Shaft height 30mm Absolute value Encoder single turn 21-bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6042-1AF61-2AA1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.4KW;Nn =3000 U/min M0= 1.9nm;Mn = 1.27nm Shaft height 45 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip key tolerance N Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6042-1AF61-2AB1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.4KW;Nn =3000 U/min M0= 1.9nm;Mn = 1.27nm Shaft height 45 mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6042-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.75KW;NN=3000 RPM M0 = 2.39 Nm;Mn = 2.39nm Shaft height 40mm Actual value Encoder 20 bit (12 bit multi-turns) with slip key tolerance N No lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6042-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.75KW;NN=3000 RPM M0 = 2.39 Nm;Mn = 2.39nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N With lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6042-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.75KW;NN=3000 RPM M0 = 2.39 Nm;Mn = 2.39nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N No lock gate protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6042-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 0.75KW;NN=3000 RPM M0 = 2.39 Nm;Mn = 2.39nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6042-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN= 0.75kW;NN = 3000 M0 = 2.39 Nm;Mn = 2.39nm axle height 40mm absolute value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6042-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN= 0.75kW;NN = 3000 M0 = 2.39 Nm;Mn = 2.39nm Axis height 40mm Absolute value encoder single turn 21-bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6042-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN= 0.75kW;NN = 3000 M0 = 2.39 Nm;Mn = 2.39nm Axle height 40mm Absolute value encoder single-turn 21-bit with smooth shaft tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6042-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230 V 3 AC PN= 0.75kW;NN = 3000 M0 = 2.39 Nm;Mn = 2.39nm Shaft height 40mm Absolute value encoder single turn 21-bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6044-1AF61-2AA1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2AB1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2AG1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2AH1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2LA1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2LB1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2LG1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-1AF61-2LH1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =3000 U/min M0=3.5 Nm;Mn = 2.39nm Shaft height 45mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6044-2AF21-1AA1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN=1 KW;Nn =3000 U/min M0=3.18 Nm;Mn = 3.18nm axle height 40mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N Parking Brakes Protector class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1AB1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN=1 KW;Nn =3000 U/min M0=3.18 Nm;Mn = 3.18nm axle height 40mm incremental encoder TTL 2500 incremental/rotary slip key tolerance N belt parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1AG1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN=1 KW;Nn =3000 U/min M0=3.18 Nm;Mn = 3.18nm axle height 40mm incremental encoder TTL 2500 incremental/RPM smooth axle tolerance N Parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1AH1

SIMOTICS S-1FL6 working voltage 230 V three-phase AC PN=1 KW;Nn =3000 U/min M0=3.18 Nm;Mn = 3.18nm axle height 40mm incremental encoder TTL 2500 incremental/RPM smooth axle tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1LA1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 1 KW;NN=3000 RPM M0 = 3.18nm;Mn = 3.18nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N No lock gate protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1LB1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 1 KW;NN=3000 RPM M0 = 3.18nm;Mn = 3.18nm Shaft Height 40mm Actual Value Encoder 20 bit (12 bit multiple turns) with slip key tolerance N With lock brake protection mode IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1LG1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 1 KW;NN=3000 RPM M0 = 3.18nm;Mn = 3.18nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N No lock gate protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1LH1

SIMOTICS S-1FL6 operating voltage 230 V 3 AC PN = 1 KW;NN=3000 RPM M0 = 3.18nm;Mn = 3.18nm Shaft Height 40mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N with lock protection IP65 with sealing ring and inverter compatible SINAMICS V90

1FL6044-2AF21-1MA1

SIMOTICS S-1FL6 power supply 230 V three-phase AC PN=1 KW;Nn =3000 U/m M0= 3.18nm;Mn = 3.18nm axle height 40mm absolute value encoder single-turn 21-bit with slip key tolerance N Parking brake, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6044-2AF21-1MB1

SIMOTICS S-1FL6 power supply 230 V three-phase AC PN=1 KW;Nn =3000 U/m M0= 3.18nm;Mn = 3.18nm Axis height 40mm Absolute value encoder single turn 21-bit with slip key tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6044-2AF21-1MG1

SIMOTICS S-1FL6 power supply 230 V three-phase AC PN=1 KW;Nn =3000 U/m M0= 3.18nm;Mn = 3.18nm axle height 40mm absolute value encoder single-turn 21-bit with smooth axle tolerance N non-parking brakes, protection class IP65 with suitable drive oil seal SINAMICS V90

1FL6044-2AF21-1MH1

SIMOTICS S-1FL6 power supply 230 V three-phase AC PN=1 KW;Nn =3000 U/m M0= 3.18nm;Mn = 3.18nm Shaft height 40mm Absolute value encoder single turn 21-bit with smooth shaft tolerance N, with parking brake protection class IP65, with suitable for driving oil seals V90

1FL6052-2AF21-2AA1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder with bend plug incremental TTL 2500 delta/lap with guide key, tolerance N, with hold brake, protective class sealing ring compatible with converter SINAMICS V90

1FL6052-2AF21-2AB1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder with bend plug incremental TTL 2500 delta/lap with guide key, tolerance N, with hold brake, protective class sealing ring compatible with converter SINAMICS V90

1FL6052-2AF21-2AG1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder with bend plug incremental TTL 2500 delta/lap common shaft, tolerance N, without lock, protective class sealing ring compatible with converter SINAMICS V90

1FL6052-2AF21-2AH1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder with bend plug delta TTL 2500 delta/lap common shaft, tolerance N, with lock gate, protective class sealing ring compatible with converter SINAMICS V90

1FL6052-2AF21-2LA1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 1.5KW;NN = 3000rpm M0 = 4.78nm;Mn = 4.78nm Axis Height 50mm Actual Value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N, no locking brake, protection mode IP65, with sealing ring compatible with inverter SINAMICS V90

1FL6052-2AF21-2LB1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 1.5KW;NN = 3000rpm M0 = 4.78nm;Mn = 4.78nm Axis Height 50mm Actual Value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N, with holding brake, protection mode IP65, with sealing ring compatible with inverter SINAMICS V90

1FL6052-2AF21-2LG1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 1.5KW;NN = 3000rpm M0 = 4.78nm;Mn = 4.78nm Axis Height 50mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Axis tolerance N, No lock, Protection mode IP65, Compatible with frequency changer SINAMICS V90 with seal ring

1FL6052-2AF21-2LH1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 1.5KW;NN = 3000rpm M0 = 4.78nm;Mn = 4.78nm Shaft Height 50mm Actual Value Encoder 20-bit (12-bit multi-turns) Smooth Shaft tolerance N, with holding brake, protection mode IP65, compatible with frequency changer SINAMICS V90 with sealing ring

1FL6052-2AF21-2MA1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder absolute type single turn 21 bit 2500 deltments/turn with bend plug, tolerance N with guide key, no lock protection class IP65, compatible with converter SINAMICS V90 with seal ring

1FL6052-2AF21-2MB1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, encoder with bend plug absolute single turn 21 bit, with guide key, tolerance N, with hold brake, protective class seal is compatible with converter SINAMICS V90

1FL6052-2AF21-2MG1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, absolute single-turn 21-bit common shaft with bend plug encoder, tolerance N, without lock, protective class seal is compatible with converter SINAMICS V90

1FL6052-2AF21-2MH1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN= 1.5KW;Nn =3000 RPM M0= 4.78nm;Mn = 4.78nm, shaft height 50 mm, absolute single-turn 21-bit common shaft with bend plug encoder, tolerance N, with holding brake, protective class sealing ring compatible with converter SINAMICS V90

1FL6054-2AF21-2AA1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, encoder with bend plug incremental TTL 2500 delta/lap with guide key, tolerance N, with hold brake, protective class sealing ring compatible with converter SINAMICS V90 Siemens SINAMICS V90 supplier

1FL6054-2AF21-2AB1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, encoder with bend plug incremental TTL 2500 delta/lap with guide key, tolerance N, with hold brake, protective class sealing ring compatible with converter SINAMICS V90

1FL6054-2AF21-2AG1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, encoder with bend plug delta TTL 2500 delta/lap common shaft, tolerance N, without lock, protective class seal is compatible with converter SINAMICS V90

1FL6054-2AF21-2AH1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, encoder with bend plug delta TTL 2500 delta/lap common shaft, tolerance N, with lock gate, protective class sealing ring compatible with converter SINAMICS V90

1FL6054-2AF21-2LA1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 2KW;NN = 3000rpm M0= 6.37nm;Mn= 6.37nm Axis H8 50mm Actual value Encoder 20-bit (12-bit multi-turns) with slip key tolerance N, no locking brake, protection mode IP65, compatible with inverter SINAMICS V90 with sealing ring

1FL6054-2AF21-2LB1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 2KW;NN = 3000rpm M0= 6.37nm;Mn= 6.37nm axis height 50mm actual value encoder 20-bit (12-bit multi-turns) with slip key tolerance N, with holding brake, protection mode IP65, with sealing ring compatible with inverter SINAMICS V90

1FL6054-2AF21-2LG1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 2KW;NN = 3000rpm M0= 6.37nm;Mn= 6.37nm Shaft height 50mm actual value encoder 20-bit (12-bit multi-turns) smooth shaft tolerance N, no lock, protection mode IP65, with sealing ring compatible with inverter SINAMICS V90

1FL6054-2AF21-2LH1

SIMOTICS S-1FL6 working voltage 230V 3AC PN = 2KW;NN = 3000rpm M0= 6.37nm;Mn= 6.37nm Shaft height 50mm actual value Encoder 20-bit (12-bit multi-turns) smooth shaft tolerance N, with holding brake, protection mode IP65, with sealing ring compatible with inverter SINAMICS V90

1FL6054-2AF21-2MA1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, encoder with bend plug absolute single turn 21 bit, with guide key, tolerance N, without holding brake, protection class sealing ring compatible with converter SINAMICS V90

1FL6054-2AF21-2MB1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, with bend plug encoder absolute single turn 21 bit, with guide key, tolerance N, with hold brake, protection class seal compatible with converter SINAMICS V90

1FL6054-2AF21-2MG1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, absolute single-turn 21-bit common shaft with bend plug encoder, tolerance N, without lock, protective class sealing ring compatible with converter SINAMICS V90

1FL6054-2AF21-2MH1

SIMOTICS S-1FL6 operating voltage 230 V 3AC PN=2 KW;NN=3000 RPM M0= 6.37nm;Mn = 6.37nm, shaft height 50 mm, absolute single-turn 21-bit common shaft with bend plug encoder, tolerance N, with holding brake, protective class sealing ring compatible with converter SINAMICS V90

1FL6061-1AC61-2AA1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2LB1

SIMOTICS S-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6061-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 0.75KW;Nn =2000 U/min M0=4 Nm;Mn = 3.58nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6062-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=1 KW;Nn =2000 U/min M0=6 Nm;Mn = 4.78nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6064-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.5KW;Nn =2000 U/min M0=8 Nm;Mn = 7.16nm shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90 Siemens SINAMICS V90 supplier

1FL6066-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage 400 V 3AC PN= 1.75KW;NN=2000 RPM M0=11 Nm;Mn =8.36 Nm, shaft height 65 mm, incremental encoder TTL 2500 increments/turn, with guide key tolerance N, with lock brake;Protection class IP65, with seal ring compatible with converter SINAMICS V70 and V90

1FL6066-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6066-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 1.75KW;Nn =2000 U/min M0=11 Nm;Mn = 8.36nm Shaft height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Incremental encoders 2500 Incremental/Rotary Strip Slide keys, tolerance N Incremental/Rotary Strip Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance N-band parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6067-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=2 KW;Nn =2000 U/min M0=15 Nm;Mn = 9.55nm Axis Height 65mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6090-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/Revolt with slidkey, tolerance non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6090-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip keys, tolerance zone parking brakes IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6090-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90 Siemens SINAMICS V90 supplier

1FL6090-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6090-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Absolute value encoder 20-bit (12-bit multi-turns) with slip keys, tolerance non-parking brake protection class IP65 with sealing ring compatible with frequency converter

1FL6090-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Absolute value encoder 20 bit (12 bit multi turns) with slide key, tolerance with parking brake protection class IP65 with sealing ring compatible with frequency converter

1FL6090-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N Parking Brake Protection Class IP65 with sealing ring compatible with frequency converter

1FL6090-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 2.5KW;Nn =2000 U/min M0=15 Nm;Mn = 11.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage 3AC 400 V PN = 3.5KW;NN=2000 RPM M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Increment encoders 2500 Increment/Revolt Strip Slide keys, tolerance N Non Parking Brake Protection Class IP65 with seal ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip keys, tolerance zone parking brakes IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with sliding keys, tolerance zone parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6092-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90 

Siemens SINAMICS V90 supplier

1FL6092-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN= 3.5KW;Nn =2000 U/min M0=22 Nm;Mn = 16.7nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/Revolt with slidkey, tolerance non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip keys, tolerance zone parking brakes IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Increment encoders with 2500 Increment/RPM smoother axles, tolerance N non-parking brakes with IP65 protection class with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring SINAMICS V70&V90

1FL6094-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with sliding keys, tolerance zone parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6094-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=5 KW;Nn =2000 U/min M0=30 Nm;Mn = 23.9nm Shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6096-1AC61-2AA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip keys, tolerance N Non parking brake protection class IP65 with sealing ring SINAMICS V70&V90 Siemens SINAMICS V90 supplier

1FL6096-1AC61-2AB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Incremental encoders 2500 Incremental/swivel slip keys, tolerance zone parking brake protection class IP65 with sealing ring SINAMICS V70&V90

1FL6096-1AC61-2AG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N Non parking brake protection class IP65 with sealing ring SINAMICS V70&V90

1FL6096-1AC61-2AH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Increment encoder 2500 Increment/RPM Smooth axle, tolerance N with parking brake protection class IP65 with sealing ring SINAMICS V70&V90

1FL6096-1AC61-2LA1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with slip keys, tolerance non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6096-1AC61-2LB1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) with sliding keys, tolerance zone parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6096-1AC61-2LG1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N non-parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

1FL6096-1AC61-2LH1

SIMOTICS S-1FL6-1FL6 working voltage three-phase AC 400 V PN=7 KW;Nn =2000 U/min M0=40 Nm;Mn = 33.4nm shaft height 90 mm with bend plug;Absolute encoder 20-bit (12-bit multi-turns) smooth shaft, tolerance N with parking brake protection class IP65 with sealing ring and inverter compatible SINAMICS V70&V90

Siemens SINAMICS V90 supplier

Packaging and Transportation