An overview of the
SITOP - lies at the heart of the automation system
Due to its high reliability, SITOP power supplies have been widely adopted worldwide to cope with critical grid conditions.Siemens complete battery pack can provide a regulated voltage of 24 V and other output voltage.The unique series of DC UPS and additional modules extend the range of power systems to provide protection for 24 V power supplies against interference from the grid and DC voltage side.
Excellent SITOP reliability
The reliability of SITOP has been proven in almost every power supply system worldwide.Sitop power keeps the device running thanks to its flexible wide range of inputs, excellent load characteristics, and all relevant certifications.Additional modules can offset DC voltage or input side interference.In addition to the uninterruptible power supply, the 24 V power supply also buffers power failures at the second, minute or hour levels.Even if overload or short circuit occurs, the output circuit can choose to turn off the feeder and continue to supply power to the load.Redundant power supply solutions can be configured for critical applications.If replacement is required, Siemens' global customer service ensures fast delivery: all SITOP products can be delivered off the shelf.Siemens SITOP power supplier
Excellent SITOP efficiency
Low energy costs are a valuable competitive advantage.In this respect, SITOP plays a vital role: these primary switching power supplies have extremely high operational efficiency.For example, SITOP PSU8200 and PSU6200 are up to 95% efficient.Low power consumption across the entire performance range (even during no-load operation).This is important because the power supply rarely runs at full load.
On the other hand, SITOP PSU8600 captures all the output energy data, which is then processed by the energy management system.With ProfiEnergy, specific power outputs can also be turned off specifically, for example during idle periods.The whole process chain is characterized by high efficiency: by providing special tools, power supply and DC UPS can be easily selected;Users can obtain all the structural data and corresponding product documentation required by all common CAE systems.
Excellent SITOP integration
SITOP is the benchmark for integration: the integration of SITOP PSU8600 power systems and SITOP UPS1600 DC fully integrated into uninterruptible power in automation, TIA Portal, and the new SITOP Manager at all levels saves time and costs, simplifying fail-safe configurations.The S7 function block evaluates important diagnostic information for SITOP selective modules and the new SITOP PSU6200 product line.
To provide protection against power outages for PC-based automation systems, SITOP UPS1600 can be easily integrated via USB or Ethernet.With the SITOP library of SIMATIC PCS 7, a 24 V power supply can be transparently provided in the process control system during continuous operation.In addition to PROFINET, SITOP PSU8600 and SITOP UPS1600 can now communicate via OPC UA.With OPC UA servers, devices such as controllers or PCs can be directly integrated into automation applications through OPC UA clients from different manufacturers.
Three SITOP categories that meet different industrial power supply requirements
Enhanced power supply
These enhanced switching power supplies are ideal for achieving the highest reliability and functionality in the process and automotive industry, specialized machine manufacturing, or harsh environments.The SITOP PSU8200 power supply product line offers excellent overload characteristics, efficiency and compactiveness to meet the stringent requirements in these areas.In addition, the SITOP PSU8600 provides a power system with open communication capabilities that can be optimally integrated in a digital environment.
Standard power supply Siemens SITOP power supplier
Siemens' standard product lines are designed with typical industrial requirements in mind, such as those used in the production of series of machines.The new versatile SITOP PSU6200 power supply was developed based on Siemens' experience in the time-proven SITOP product line.The new SITOP standard power supply is more efficient, has a large number of diagnostic capabilities, and is more robust.
Basic power supply
From flat power sources suitable for distribution cabinets to economical and basic power sources to thin and long power sources suitable for control boxes - SITOP power supplies meet all requirements, including those in the low performance range.LOGO!Power is a small Power supply, for example, it has a LOGO!8 module design form.These space-saving SITOP Compact power supplies are ideal for distributed applications.Sitop Lite is affordable and meets the primary requirements of a reliable main-switch regulator.
Siemens SITOP module supplier
Technical power supply for demanding solutions
Single-phase, two-phase and three-phase Sitop Modular power supply is a process power supply that can meet demanding requirements.They are highly functional and suitable for use in complex factory equipment.The wide range of power inputs allows connection to almost any power supply system worldwide, and ensures extremely high safety even when the voltage fluctuates greatly.These power supplies have outstanding overload characteristics: the power boost function can provide up to three times the rated current for a short period of time, and with 150% extra power, can connect high power consuming loads without any problem.In case of overload, the user can choose between constant current and automatic restart.Because of their high efficiency, they keep energy consumption and heat accumulation low in the control cabinet, and their compact metal housing also saves space.
To further improve the availability of 24 V power, the SITOP Smart power supply can be used in combination with buffering, DC UPS, redundancy and selective modules.
Main Product HighlightsSiemens SITOP power supplier
Single phase, 24 V DC/5 A, 10 A, 20 A and 40 A
Single phase and two phase, 24 V DC / 5A, 10 A
Three-phase, 24 V DC/ 20 A, 40 A, 36 V/ 13 A and 48 V/ 10 A, 20 A
Ultra-thin long design - no side mounting clearance required
Power boost with 3 times rated current (25 ms) for trip protection devices
With 1.5 times the rated current of additional power supply (5 s/min), allowing short functional overload
Short-circuit response mode can be selected between constant current and restart
Symmetrical load distribution can be selected for parallel operation
Operating status is indicated by 3 LED lights
Efficiency up to 94%
Wide temperature range, -25 ~ +70 °C
Through a wide range of certifications such as CULUS, ATEX, IECEX and GL
Siemens SITOP module supplier
Single-phase, 24 V DC
Single-phase, 24 V DC /5 A (SITOP PSU8200)
Single-phase, 24 V DC /10 A (SITOP PSU8200)
Single and dual phase, 24 V DC/20 A (SITOP PSU100M)
Single and dual phase, 24 V DC/20 A
Single and dual phase, 24 V DC/40 A
Single-phase and two-phase, 24 V DC
Single and double phase, 24 V DC/10 A
Three phase, 24 V DC
Three phase, 36 V DC
Three-phase, 24 V DC/20 A (SITOP PSU300M)
Three-phase, 24 V DC/40 A (SITOP PSU300M)
Three phase, 48 V DC
Three-phase, 24 V DC/ 10A (SITOP PSU300M)
Three phase, 24 V DC/20 A
6EP1336-3BA10
SITOP PSU8200 20 A Regulating Power Input: AC 120-230 V DC 110-220 V Output: DC 24 V/20 A
6EP3333-8SB00-0AY0
SITOP PSU8200 24V / 5A Regulating Power Input: AC 120/230 V Output: DC 24V / 5A
6EP3334-8SB00-0AY0
SITOP PSU8200 24 V/10 A Regulating Power Input: AC 120/230 V Output: DC 24 V/10 A
6EP3337-8SB00-0AY0
SITOP PSU8200 24 V/40 A Regulating Power Input: AC 120/230 V Output: DC 24 V/40 A
6EP3333-8SB00-0AY0
SITOP PSU8200 24V / 5A Regulating Power Input: AC 120/230 V Output: DC 24V / 5A
6EP3334-8SB00-0AY0
SITOP PSU8200 24 V/10 A Regulating Power Input: AC 120/230 V Output: DC 24 V/10 A
6EP1336-3BA10
SITOP PSU8200 20 A Regulating Power Input: AC 120-230 V DC 110-220 V Output: DC 24 V/20 A
6EP1336-3BA00
SITOP Modular 20 A Regulating Power Input: AC 120/230 V Output: DC 24 V/20 A
This product has a successor:
6EP1336-3BA10 Compare products
6EP1336-3BA00-8AA0
SITOP Modular + 20 A Regulating Power Input: AC 120/230 V Output: DC 24 V/20 A Version with protective coating
Replacement: 6EP3336-7SC00-3AX0
6EP1337-3BA00
SITOP PSU100M 40A regulator power input: 120/230 V AC, output: 24 V DC/40 A!!!!Gradually discontinued products!!!!Successor: 6EP3337-8SB00-0AY0
Discontinued goods since June 2017;Subsequent models 6EP3337-8SB00-0AY0
6EP1333-3BA10
Sitop PSU200m 5 A regulator power input: AC 120/230-500 V output: DC 24 V/5 A
6EP1333-3BA10-8AC0
SITOP PSU200m + 5A Regulating Power Input: AC 120-230/230-500 V Output: DC 24 V/ 5A version with protective coating
6EP1334-3BA10
Sitop PSU200m 10 A regulator power input: AC 120/230-500 V output: DC 24 V/10 A
6EP1334-3BA10-8AB0
SITOP PSU200m + 10 A Regulating Power Input: AC 120-230/230-500 V Output: DC 24 V/10 A Version with protective coating
6EP1334-3BA10
Sitop PSU200m 10 A regulator power input: AC 120/230-500 V output: DC 24 V/10 A
6EP3436-8SB00-0AY0
SITOP PSU8200 24 V/20 A Regulating Power Input: 3 AC 400-500 V Output: DC 24 V/20 A
6EP3437-8SB00-0AY0
Sitop PSU8200 24 V/40 A regulated power input: 400-500 V three-phase AC output: 24 V DC/40 A
6EP3446-8SB10-0AY0
SITOP PSU8200 36 V/13 A Regulating Power Input: 3 AC 400-500 V Output: DC 36 V/13 A
6EP1961-2BA11
SITOP PSE200U 3 A Selective Module 4 Channel Input: DC 24 V/12 A Output: DC 24 V/ 4X 3 A Adjustable threshold 0.5-3 A with total signal contacts
6EP1961-2BA21
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable threshold 3-10 A with total signal contacts
6EP1961-2BA31
SITOP PSE200U 3A Selective Module 4-Channel Input: DC 24 V/ 12A Output: DC 24 V/ 4X 3A Adjustable Threshold 0.5-3A with one status information per output
Siemens SITOP power supplier
6EP1961-2BA41
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable Threshold 3-10 A with one status information per output
6EP1961-3BA01
SITOP PSE201U Buffer Module Buffer times range from 100 ms to 10 s depending on the load current
6EP1961-3BA21
Sitop PSE202U Redundant Module Input/Output: DC 24 V/40 A is suitable for two outputs with A maximum of 20A output current each
6EP1962-2BA00
SITOP PSE202U NEC Level 2 Redundant Module Input/Output: 24 V DC is suitable for setting the output power limit of 100VA to two units each with SITOP power supply
6EP1964-2BA00
Sitop PSE202U 10A Redundant Module Input/Output: 24 V DC is suitable for two outputs with up to 20A output current and up to 5 A output current each
6EP1961-2BA11
SITOP PSE200U 3 A Selective Module 4 Channel Input: DC 24 V/12 A Output: DC 24 V/ 4X 3 A Adjustable threshold 0.5-3 A with total signal contacts
6EP1961-2BA21
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable threshold 3-10 A with total signal contacts
6EP1961-2BA31
SITOP PSE200U 3A Selective Module 4-Channel Input: DC 24 V/ 12A Output: DC 24 V/ 4X 3A Adjustable Threshold 0.5-3A with one status information per output
6EP1961-2BA41
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable Threshold 3-10 A with one status information per output
6EP1961-3BA01
SITOP PSE201U Buffer Module Buffer times range from 100 ms to 10 s depending on the load current
6EP1961-3BA21
Sitop PSE202U Redundant Module Input/Output: DC 24 V/40 A is suitable for two outputs with A maximum of 20A output current each
6EP1962-2BA00
SITOP PSE202U NEC Level 2 Redundant Module Input/Output: 24 V DC is suitable for setting the output power limit of 100VA to two units each with SITOP power supply
6EP1964-2BA00
Sitop PSE202U 10A Redundant Module Input/Output: 24 V DC is suitable for two outputs with up to 20A output current and up to 5 A output current each
6EP3446-8SB00-0AY0
SITOP PSU8200 48 V/10 A Regulating Power Input: 3 AC 400-500 V Output: DC 48 V/10 A
6EP3447-8SB00-0AY0
SITOP PSU8200 48 V/20 A Regulating Power Input: 3 AC 400-500 V Output: DC 48 V/20 A
6EP1961-2BA11
SITOP PSE200U 3 A Selective Module 4 Channel Input: DC 24 V/12 A Output: DC 24 V/ 4X 3 A Adjustable threshold 0.5-3 A with total signal contacts
6EP1961-2BA21
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable threshold 3-10 A with total signal contacts
6EP1961-2BA31
SITOP PSE200U 3A Selective Module 4-Channel Input: DC 24 V/ 12A Output: DC 24 V/ 4X 3A Adjustable Threshold 0.5-3A with one status information per output
6EP1961-2BA41
SITOP PSE200U 10 A Selective Module 4 Channel Input: DC 24 V/40 A Output: DC 24 V/ 4X 10 A Adjustable Threshold 3-10 A with one status information per output
6EP1961-3BA01
SITOP PSE201U Buffer Module Buffer times range from 100 ms to 10 s depending on the load current
6EP1961-3BA21
Sitop PSE202U Redundant Module Input/Output: DC 24 V/40 A is suitable for two outputs with A maximum of 20A output current each
6EP1962-2BA00
SITOP PSE202U NEC Level 2 Redundant Module Input/Output: 24 V DC is suitable for setting the output power limit of 100VA to two units each with SITOP power supply
6EP1964-2BA00
Sitop PSE202U 10A Redundant Module Input/Output: 24 V DC is suitable for two outputs with up to 20A output current and up to 5 A output current each
6EP1457-3BA00
Sitop PSU300M 48 V/20 A Stable Power Input: 400-500 V Three-phase AC Output: 48 V DC/20 A!!Discontinued production!!Subsequent models: 6EP3447-8SB00-0AY0
Siemens standard power supplier
Siemens' standard product lines are designed with typical industrial requirements in mind, such as those used in the production of series of machines.
The new versatile SITOP PSU6200 power supply was developed based on Siemens' experience in the time-proven SITOP product line.The new SITOP standard power supply is more efficient, has a large number of diagnostic capabilities, and is more robust.
SITOP lite
he low-cost basic power supply
The single-phase SITOP lite power supplies are designed for basic requirements in industrial environments and offer all the key functions at an attractive price. Thanks to the slim design, the power supplies require little space on the standard mounting rail, and their excellent efficiency ensures low thermal losses in the control cabinet.
To further increase 24 V availability, the SITOP lite power supplies can be combined with DC UPS, redundancy and selectivity modules.
Main product highlights
24 V DC/ 2.5 A, 5 A and 10 A
1-phase wide-range input with manual switchover
Slim design - no lateral installation clearances required
High degree of efficiency
Green LED for "24 V OK"
Adjustable output voltage for compensating voltage drops
Parallel connection possible
Ambient temperature range of 0 °C to 60 °C (above 45 °C with derating)
Short-circuit and overload protection
Certification to CE, cULus and CB
Siemens SITOP power supplier
LOGO!Power
Flat type power supply for switchboard
Small.Smart.LOGO!Power
Small.Smart.LOGO!Power: With its stepped shape design, LOGO!The 8 product line is ideal for installation in small distribution cabinets.With 100...240 V AC (85...264 V) and 110...The 300 V DC wide input range stabilised power supply has two performance grades with an output voltage of 5 V and 15 V, one performance grade with an output voltage of 12 V, and four performance grades with an output voltage of 24 V.Type 12 V and Type 24 V are suitable for LOGO with corresponding voltage input!Controller power supply.The total energy consumption is small due to the high efficiency class across the entire load range and low no-load loss.With integrated current monitor, debugging and maintenance are easier.It can be used in a large number of other applications due to its wide temperature range from -25 °C to +70 °C.
To further improve the availability of 24 V power, use the LOGO!Power supplies are used in combination with DC-UPS, redundancy and selective modules.
When a DC voltage is required for components, LOGO!Power is ideal.It provides A current of up to 4 A and can be used in any field (for example, lighting and heating controllers in building technology applications or access control systems).LOGO!Power is also ideal for use in industrial automation, for example, in packaging machines, machine tools, conveyor belts, or sorting system applications.
Main Product Highlights
its
Widths range from 18 mm to 72 mm, taking up little space in the control cabinet or switchboard
Over the entire power range, the energy efficiency is up to 90%, and the no-load loss in line with ERP is less than 0.3W
Operating temperature range from -25 °C to +70 °C with international certification, suitable for global applications
Load monitoring is performed by measuring the output current in real time while the cable is continuously open (that is, without interrupting the DC supply)
Flexible mounting using DIN guide rails or wall mounting in different mounting positions
The product line is rich in content, including 5 V, 12 V, 15 V and 24 V DC, power up to 100 W of 11 devices
(New product: 12 V/ 0.9A and 24 V/ 0.6A)
With 100...240 V AC wide range input,
It can operate flexibly in all standard single-phase supply networks without switching, and can be used at 110...300 V DC power supply network operation
With power reserve at startup and constant current under overload condition, the load with high surge current can be connected smoothly with high reliability
6EP3310-6SB00-0AY0
The logo!Power supply 5 V / 3A regulating power input: AC 100-240 V output: DC 5 V / 3A
6EP3311-6SB00-0AY0
The logo!Power supply 5 V / 6.3A regulating power input: AC 100-240 V output: DC 5 V / 6.3A
6EP3320-6SB00-0AY0
The logo!Power supply 12 V / 0.9A regulating power input: AC 100-240 V output: DC 12 V / 0.9A
6EP3321-6SB00-0AY0
The logo!Power supply 12V / 1.9A regulating power input: AC 100-240 V output: DC 12V / 1.9A
6EP3322-6SB00-0AY0
The logo!Power supply 12V / 4.5A regulating power input: AC 100-240V output: DC 12V / 4.5A
6EP3321-6SB10-0AY0
The logo!Power supply 15V / 1.9A regulating power input: AC 100-240 V output: DC 15V / 1.9A
6EP3322-6SB10-0AY0
The logo!Power supply 15 V / 4A regulating power input: AC 100-240 V output: DC 15 V / 4A
6EP3330-6SB00-0AY0
The logo!Power supply 24V / 0.6A regulating power input: AC 100-240 V output: DC 24V / 0.6A
6EP3331-6SB00-0AY0
The logo!Power supply 24 V / 1.3A regulating power input: AC 100-240 V output: DC 24 V / 1.3A
6EP3332-6SB00-0AY0
The logo!Power supply 24 V / 2.5A regulating power input: AC 100-240 V output: DC 24 V / 2.5A
6EP3333-6SB00-0AY0
The logo!Power supply 24 V / 4A regulating power input: AC 100-240 V output: DC 24 V / 4A
6EP3330-6SB00-0AY0
The logo!Power supply 24V / 0.6A regulating power input: AC 100-240 V output: DC 24V / 0.6A
6EP3331-6SB00-0AY0
The logo!Power supply 24 V / 1.3A regulating power input: AC 100-240 V output: DC 24 V / 1.3A
6EP3332-6SB00-0AY0
The logo!Power supply 24 V / 2.5A regulating power input: AC 100-240 V output: DC 24 V / 2.5A
6EP3333-6SB00-0AY0
The logo!Power supply 24 V / 4A regulating power input: AC 100-240 V output: DC 24 V / 4A
Packaging and Transportation
